Pneumatic Quarry Boring DTH Drilling Machines
Model NO.
LQ-PE-90B
Condition
New
Brand
Keentool
Type
Pneumatic Quarry Drilling Machine for Boring
Diameter of Drilling Hole
65-90mm
Max Depth of Drill Hole
30m
Drilling Speed
3-6m/H
Air Consumption
9-12m3/Min
Drill Direction
Any Direction
Working Air Pressure
0.6MPa
Application
Drill Holes
Trademark
KEENTOOL
Transport Package
Crate
Specification
SGS, CE
Origin
Quanzhou China
HS Code
84306919
Description
Description:
Pneumatic quarry drilling machine for boring commonly used for drilling use a pneumatic system: The energy thrust is transmitted by compressed air.
Pneumatic quarry drilling machine for boring commonly used for drilling use a pneumatic system: The energy thrust is transmitted by compressed air.
In fact Pneumatic quarry drilling machine for boring need air compressors. The pneumatic hammers penetrate the rock mass by means of a drill rod that is nothing more than a shaped steel rod. The pneumatic system is supported or sometimes substituted by the hydraulic system in which hydraulic oil instead of air is used to transmit the energy.
Technical Data:
| Model | LQ-PE-90B | LQ-PE-90B |
| Type | Full Pneumatic | Pneumatic & Electric |
| Diameter of the drilling hole | Φ65-Φ90 | Φ65-Φ90 |
| Max depth of drill hole | 30-40 Meter | 25-30Meter |
| Drilling speed | 3-6 Meter/Hour | 4-6 Meter/Hour |
| Air consumption | 9-12 M 3 /Min | 5-8 M 3 /Min |
| Minimum air pressure | 0.6Mpa | 0.6Mpa |
| Drilling direction | Any direction (Horizontal, Vertical, Slant) | |
| Extension distance | 1.2 Meters | 1.2 Meters |
| Advance device | Pneumatic motor, reducer, chain | Pneumatic motor, reducer, chain |
| Rotation device | Pneumatic motor, reducer | Electric motor, reducer |
| Adjust height of down jack | 220mm | 220mm |
| Control panel | Remote control, manual change direction | |
| Net weight | 550 KGS | 560KGS |
ALWAYS AT YOUR SERVICE–KEENTOOL