Minrry Photovoltaic Training Bench Didactic Equipment Photovoltaic Power Generation Trainer
Description
Didactic Equipment Photovoltaic Power Generation Trainer
1 Product Overview
1.1 Overview
The training system can simulate the process of solar power generation, so that students have a preliminary intuitive understanding of the solar power system. The solar panels are driven by high-intensity LED lights. Through relevant experiments, students’ knowledge and skills are cultivated, which is suitable for the teaching and skills training assessment of higher vocational colleges, higher vocational schools, secondary vocational schools and technical schools.
1.2 Features
(1) The training platform adopts aluminum profile column frame structure, the measuring instrument and the training power supply are built-in integrated installation, and the universal wheel is provided at the bottom. The units are flexible, easy to use and not easy to damage.
(2) The experimental circuit and device are fully equipped and can be used in combination to complete the training content of various courses.
(3) The training platform has a good security protection system.
The product is similar as MR-HM 150 Base module for experiments in fluid mechanics
2 Performance Parameters
(1) Solar power generation device: all aluminum alloy structure, the angle of the photovoltaic panel can be adjusted, the analog light source can be adjusted in the vertical direction by 120 degrees, and the external dimension is 1230*753*1250mm (length, width and height)
(2) Training power box frame: aluminum frame structure, aluminum alloy box unit form, dimensions 1100mm × 300mm × 750mm (length, width and height)
(3) The parameters of a single solar panel are as follows:
Rated peak power: 30W
Short circuit current: 1.9A
Maximum current: 1.71A
Maximum voltage: 17.6V
Short circuit current: 1.87A
Open circuit voltage: 21.6V
(4) Battery technical parameters:
Voltage: 12V
Capacity: 7AH
Battery loss: 10V ± 1V
Executive standard: GB/T 9535
Relative humidity: 35~85% RH (no condensation)
(5) Working environment:
Temperature -10 ~ +40°C Temperature ≤80°C
Ambient air: non-corrosive, flammable, no large amount of conductive dust
(6) Power supply:
Power consumption: ≤5000W,
Working power supply: AC220±10%,
Power supply: single-phase three-wire AC220±10%, 50HZ
Working method: continuous
(7) Overall weight: <500Kg
2 Performance Parameters
(1) Solar power generation device: all aluminum alloy structure, the angle of the photovoltaic panel can be adjusted, the analog light source can be adjusted in the vertical direction by 120 degrees, and the external dimension is 1230*753*1250mm (length, width and height)
(2) Training power box frame: aluminum frame structure, aluminum alloy box unit form, dimensions 1100mm × 300mm × 750mm (length, width and height)
(3) The parameters of a single solar panel are as follows:
Rated peak power: 30W
Short circuit current: 1.9A
Maximum current: 1.71A
Maximum voltage: 17.6V
Short circuit current: 1.87A
Open circuit voltage: 21.6V
(4) Battery technical parameters:
Voltage: 12V
Capacity: 7AH
Battery loss: 10V ± 1V
Executive standard: GB/T 9535
Relative humidity: 35~85% RH (no condensation)
(5) Working environment:
Temperature -10 ~ +40°C Temperature ≤80°C
Ambient air: non-corrosive, flammable, no large amount of conductive dust
(6) Power supply:
Power consumption: ≤5000W,
Working power supply: AC220±10%,
Power supply: single-phase three-wire AC220±10%, 50HZ
Working method: continuous
(7) Overall weight: <500Kg
4 Can Complete The Training Content
(1) Battery characteristics experiment: 1) Measurement of electrical parameters 2) Series and parallel connection of batteries
(2) Charge controller experiment: 1) reverse protection experiment 2) controller overcharge protection experiment of battery 3) controller over-discharge protection experiment of battery 4) anti-back charge experiment
(3) Measurement experiment of power generation
(4) Photovoltaic panel power measurement experiment
(5) Maximum power measurement experiment of photovoltaic panels under different illumination
(6) Photovoltaic panel output characteristics experiment
(7) Photovoltaic panel charging control principle experiment
(8) Inverter basic principle experiment
(9) Inverter basic principle experiment
(10) Simple inverter output waveform test experiment
(11) Inverter power supply driving AC load test
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | Shouldshine, SSEDU, JSS. |
8 | Production time | From 10 days to 60 days according to different items |
We have other laboratory as below
Electrical laboratory equipment, such as PLC training workbench, transformer training workbench, AC machine training equipment, DC motor trainer kit
Mechatronics training equipment, such as mechatronics training system modular product system 9 stations, robot arm trainer, PLC electro pneumatic trainer, electro hydraulic trainer
Thermal lab equipment
Refrigeration and air conditioning training equipment
PCB lab equipment
Food Machine Trainer