High Precision Slant Bed CNC Lathe with Taiwan Technology (BL-S32/32T)
نموذج رقم.
BL-S32/32T
الصف التلقائي
Semiautomatic
Setting Mode
Floor-type
دقة
High Precision
شهادة
هذه, ISO 9001
حالة
جديد
الأعلى. Swing Over Bed
360مم
Effective Max. Turning Length
120/150مم
Spindle Type
A2-4
CNC Controller
Germany-Siemens
Tool Turret Type
Gang Tool/8 Station Tool Turret
Machining Accuracy
It6
Chuck Size
5′ ′
علامة تجارية
BLIN
حزمة النقل
Plywood Case
تخصيص
China GB, CQC, هذه
أصل
الصين
رمز النظام المنسق
8458110090
وصف
-S32 mount gang tool device, S32T mount 8 station HYDRAULIC-SERVO tool turret.
-Super compact structure(similar as JAPAN machine), big inside space, modern appearance
-Adopt TAIWAN technology, designed by TAIWAN engineer, most parts adopt GERMANY/JAPAN/TAIWAN brand.
-Adopt 30°mono-block slant bed design, high rigidity, good machining flexibility,easy for chip conveying
-Adopt modularization design, has strong extended function, easy for various especial configuration choice, such as tool setter, robot etc.
– Adopt HT300 resin sand cast iron, after aging treatment and FEA analysis, small distortion, good torsional strength,good heat stability.
-Frame adopt oil-coolant separation design, adopt independent coolant tank
-Adopt high precision integral spindle unit, spindle motor adopt high performance servo motor, big output torque,high speed,wide adjustment range
-Adopt high precision pre-stretched ball screw(double-nuts), coupled with feeding motor directly by linkager, no gap,high transmission rigidity, can realize μ class precise turning.
-Adopt high precision wide linear guideway, high rigidity and long using lifespan, fast moving speed, good accuracy holding, suitable for precise machining
Details:
Item | تخصيص | Unit | BL-S32 | BL-S32T |
سعة | Chuck size | / | 5” collet | 5”/6”* chuck |
الأعلى. swing dia. over bed | مم | Φ360 | ||
الأعلى. swing dia. over slide | مم | Φ90 | Φ160 | |
الأعلى. turning length | مم | 260 | 180 | |
الأعلى. turning dia. | مم | Φ85 | Φ240 | |
Spindle | Spindle bore | مم | Φ46 | |
Spindle end type | / | A2-4 | ||
Spindle speed | دورة في الدقيقة | 5000 | ||
الأعلى. bar through dia. | مم | Φ35 | Φ32 | |
Spindle motor power | كيلووات | 3.7/5.5* | ||
X/Z axes | X axes travel | مم | 300 | 120+30 |
Z axes travel | مم | 300 | 300 | |
X/Z axes rapid moving speed | m/min | 28/28 | ||
Tool post | Tool turret type | / | Gang tool | Hydraulic-Servo tool turret |
Tool qty | / | 5 | 8 | |
Vicinal tool changing time | s | / | 0.4 | |
Farthest tool changing time | s | / | 0.57 | |
Toolshank size | مم | 16×16(20×20), Φ25 | 20×20, Φ25 | |
Tailstock | Tailstock quill taper | / | None | |
Accuracy | Ex-circle finish turning accuracy | / | IT6 | |
Finish turning roughness | مم | Ra0.4~1.6 | ||
Finish turning roundness | مم | ≤0.003 | ||
Positioning accuracy(X/Z) | مم | 0.005/0.008 | ||
Repeat positioning accuracy(X/Z) | مم | 0.002/0.004 | ||
Others | Coolant motor | ث | 180 | |
Coolant liquid flux | m³/h | 3 | ||
Overall size | مم | 1700×1360×1600 | ||
N.W. | كلغ | 1500 | 1600 |
* As option
Main parts brand:
Item | ماركة |
CNC controller | GERMANY-SIEMENS |
X,Z axes driver&motor | GERMANY-SIEMENS |
Spindle driver&motor | CHINA top-CTB |
Spindle unit | TAIWAN-VOLIS/KENTURN |
Tool turret | GERMANY-SAUTER/INDIA-PRAGATI |
Ball screw | TAIWAN-PMI/HIWIN C3 class |
Ball screw bearing | JAPAN-NSK/NTN |
Linear guideway | TAIWAN PMI/HIWIN |
Lubrication system | TAIWAN-ISHAN |
Rotary oil cylinder&chuck | TAIWAN-AUTOGRIP |
Hydraulic parts | TAIWAN/JAPAN |
Coolant pump | Joint-venture |
ميلا في الغالون | USA-HEDSS |
Tri-color indication lamp | KOREA-QLIGHT |
Isolation transformer | CHINA top-CHINT/JIUKO |
Circuit breaker | FRANCE-SCHNEIDER |
AC contactor | FRANCE-SCHNEIDER |
تناوب | JAPAN-OMRON |
DC switch power supply | TAIWAN-MEANWELL |
Terminal block | GERMANY-WEIDMULLER |
Synchronous belt | USA-GATES |
Synchronous belt wheel | TAIWAN-PTP |
Nuts | TAIWAN-YINSH |
Shaft coulping | GERMANY-KTR/R+W |
Scrapping plate Extensible cover | TAIWAN-WANHE |
Chip conveyor | TAIWAN-WANHE |
Coolant pipe | TAIWAN-WEIDING |
Collet, Gang tool holder | Own-made |
Standard configuration:
-SIEMENS 808D ADVANCED CNC controller
-Hydraulic collet(S32)/hydraulic chuck(S32T)
-Gang tool(S32)/8 station Hydraulic-servo tool turret(S32T)
ملحقات قياسيه:
-CNC controller programming and operating manual
-CNC controller diagnostics manual
-Machine user manual(mechanical part)
-Machine user manual(electricity part)
-Inspection report& certificate of conformity
-Packing list
-User manual for other parts
-Leveling pads& bolts
-Regular using tool kits
Optional configuration:
-SIEMENS 828D/FANUC 0i TF CNC controller
-Chip conveyor
Other models choice:
All our machines range:
معلومات عنا: