FTTH Fiber Optic Sc Upc APC Quick Connector Cost-Effective Fiber Optical Fast Connector
Descripción
Monthly sales is 500,000 PCS
1).Standard
Comply with international standards:
1.ITU-T and IEC and China standards
2.YDT 2341.1-2011 Field Assembled Optical Fiber Active Connector
Part 1: Mechanical Type
3.China Telecom fast Connector Standard [2010] No. 953
4.01C GR-326-CORE (Issue 3, 1999) General requirements for
single-mode optical connectors and jumpers
5.YD/T 1636-2007 Fiber to the Home (FTTH) Architecture and General
Requirements
2).Application field
1. Applied to open FTTH fiber terminal
3. Recovery and maintenance in fiber breakage and other accidents
6. Fiber entry for mobile base stations
FTTH Drop Cable 3×2.0mm ; Indoor 3.0mm cable
Expand to 1.2,1.6,0.9 mm diameter cable and 250um fiber
4).Optical performance parameters
| Optical Fast Connector Optical Performance (Reference to China Standard Q/CT 2299-2010-6.1) | Unidad( dB) | |||||
| Code | Test Item | Mechanical Q/CT 2299-2010-Chapter6.1 | Fusion Splicer Type YD/T 2341.2-2011-Chapter 4.7 | |||
| Average Value | Maximum Value | Average Value | Maximum Value | |||
| a | Insertion Loss | ≤0.3 | Tested with standard plugs and adapters:≤0.5 Test with any plug and adapter:≤0.7 | ≤0.25 | Tested with standard plugs and adapters:≤0.4 Test with any plug and adapter:≤0.7 | |
| b | Return Loss | ≥40(UPC);≥55(APC) | ≥50(UPC);≥60(APC) | |||
| Mark1: IL and RL Test at 1310nm. If need test 1550nm, Please tell us first. Mark2:IL and RL average and Maximum vale make as customer’s requirement. Mark3:Return Loss can customized UPC standard -45~-50dB;APC Standard -55~-60dB | ||||||
| Optical Fast Connector mechanical character (Reference to standard Q/CT 2299-2010-6.3) | Unidad( dB) | |||||
| ITEM | Tet Name | Test conditions | Judgement Standard | |||
| Insertion Loss Variation | Test Result | |||||
| Mechanical | Fusion Splicer | |||||
| a | Repeatable Assemblability | Assemblability Times: 5 Times | ≤0.3 | No Requirement | No mechanical damage, no obvious scratches on the pin surface | |
| b | vibration | frequency: 10-50Hz Sweep frequency:45 Times per minute Amplitude: 0.75mm Single Amplitude Time:Three director ,each 2 horas | ≤0.3 | ≤0.25 | No mechanical damage, such as deformation, cracking, slack, etc.. | |
| c | Drop | Height:1.5meter from sample head Test times: 8 Times | ≤0.3 | ≤0.25 | No mechanical damage, such as deformation, cracking, slack, etc. | |
| d | Repeat Plug | Plug Times: 10 | ≤0.3 | ≤0.25 | No mechanical damage, such as deformation, cracking, slack, etc. | |
| e | mechanical Durability | Plug Times: 500 | ≤0.3 | ≤0.25 | No mechanical damage, such as deformation, cracking, slack, etc. | |
| f | Tensile | Telcom Standard Q/CT 2299-2010-7.14: 0.125mm bare fiber: 4norte, No online monitoring of Optical performance; 0.25mm fiber type :4norte No online monitoring of Optical performance; 0.9mm fiber type :10norte online monitoring of Optical performance; Fiber optic cable :20norte online monitoring of Optical performance; Fiber optic cable :30norte No online monitoring of Optical performance;; Time:2 Minute | ≤0.3 | ≤0.25 | No mechanical damage, such as deformation, cracking, slack, etc. | |
| j | Tensile | Communication Standard YD/TT 2341.1-2011-5.15 Load weight:250μm fiber: 4norte 900μmFiber : 10norte Fiber optic cable 2.0mm and drop cable :20norte Fiber optic cable 3.0mm: 50norte; Load Time: fiber 30s,fiber optic cable 2min; Load rate: 50N/min<Rate<250N/min; The distance between the load point and the mechanical field connector: L=22cm~28cm | ≤0.3 | ≤0.20 | No mechanical damage, such as deformation, cracking, slack, et | |
| gramo | Twist | Load Weight:Fiber Optic cabel 15N Rate: 10 Times/Minute veces: 200Times | ≤0.3 | ≤0.25 | No mechanical damage, such as deformation, cracking, slack, et | |
| Mark 1: Fusion Splicer type can not be repeatable assembly test; Mark 2:Repeat assembly testing is Mainly assess the deterioration of the amount of insertion loss. Mark 3:After Test, Return Loss Variation≤5dB | ||||||
6). Working environment requirements
| Artículo | ||
| a | Operating temperature | -40ºC ~+85ºC |
| b | Storage temperature | -40ºC ~+85ºC |
| c | Relative humidity | ≤95%(+30ºC hours) |
| d | Atmospheric pressure | 62kPa~106kPa |
7).Environmental protection materials
norteon-corrosive materialand, no other harmful effects on human health and other equipment/facilities
/cooperating parts
8).Material corrosion resistance
All parts of this products material is preservative
There have two package way :
- 10 Pics put in one Plastic boxes. Then Plastic boxes put in one out carton.
- Each pic put in one plastic bag, then plastic bag put in one out carton.
Transportation need avoid collision, fall, rain (snow) or sun exposure
well-ventilated, dry, non-corrosive gas or sunlight warehouse,
Indoor temperature is -25ºC~+55ºC
12 months quality guarantee. During quality guarantee period,replace defective products excep tmanual damage .
13).Question and Answer
Q1: Are your trading company or manufacture ?
A: We are factory verified by SGS
Q2: Do you provide OEM service ?
A: sí, we can print your logo or label on the products or on the box.
Q3: Can you provide free samples ?
A: Free samples can be free for you, but you need pay for the shipping cost.
Q4: How can you guarentee the quality ?
A: Build on our perfect quality management system, all of our products were 100% tested before the shipment.
P5: What is your delivery time ?
A: Generally, sample: 3~5 working days. formal order: 7-10 working days.
Q6: ¿Cuáles son sus condiciones de pago? ?
A: We accept T/T, Western Union, Money Gram, PayPal.