M1020A Centerless Grinding Machine for Max. Od. 20milímetro

Machine application:
The machine is used for mass-producing cylindrical parts, ring parts in the way of centerless through feeding. And it also can be used for grinding cone parts with taper less than 1∶20 and molding rotational parts in the way of centerless in-feeding.

Machine configuration & characteristics:
1. Only reg. wheelhead feeding.
2. Single side supporting GW. spindle. Easy to change the wheel.
3. Multi-piece dynamic pressure bearing is used on GW. spindle.
4. Single side supporting RW. spindle. Easy to change the wheel.
5. Inner cone sliding bearing is used on the front of RW. spindle and rolling bearing on the rear side.
6. AC converter motor regulates RW. Speed steplessly.
7. In-feed mechanism is equipped.

Technical parameters:
Workpiece diameter:
Through feeding 0.5~20mm
(workrest special ordered when dia. <1.5milímetro)
In-feeding 3~20mm
máx.. length for jobs(standard workrest) 80milímetro

R.W. specification PSA200×100×75mm
G. W.. speed 2100r/min
R.W. speed (stepless) 10~180r/min
R.W. swiveling angle
In vertical plane -2°~ +4°
In horizontal plane -1°~ +3°
One dial division of handwheel 0.002mm
In-feed stroke
Total stroke 2.5mm
Rapid stroke 1.3~2.5mm
Slow stroke 0~1.20mm
The distance between the connecting 170mm
line from GW. center to RW. center to
the bottom of workrest
Total power 5.3kw
Machine overall dimension 1750mm×1290mm×1350mm
(with lub. oil tank and coolant tank)
Net weight 1900kgramo

Machining accuracy:
(standard testpiece Φ15×60m, 45#steel)