0.6/1kv Al XLPE/Aerial Bundled/ABC Cable for Aluminum

1.1kv,10kvinsulated overhead line
This product is suitable for AC rated voltage (Uo / tu) 1/10kv power distribution grid system.
1kv insulated overhead line adopt GB/T12527-2008 & GB/T1179-2008 standard.
10kv insulated overhead line adopt GB/T14049-2008 & GB/T1179-2008 standard.

2.Taper, name,laying occasion

Taper			Laying occasion
Copper core	Aluminum core	Steel core(intensive)aluminum stranded core
JKV	JKLV(BLVW)	JKLGV(BLVWG or BLGVW)	Aerial fixed laying lines or service wire,only for 0.6/1kv line.
JKYJ	JKLYJ	JKLGYJ	Aerial fixed laying lines,cables and trees should be set up to consider keeping a certain distance,during cable working,it is allowed to contact frequent with trees.
JKYJ/Q	JKLYJ/Q	JKLGYJ/Q	Aerial fixed laying lines,cables and trees should be set up to consider keeping a certain distance,during cable working,it is allowed to contact temporary with trees.
JKYJ/J	JKLYJ/J	JKLGYJ/J	Aerial fixed laying lines,cables and trees should be set up to consider keeping a certain distance,during cable working,it is allowed to contact frequent with trees,allow low laying.

3.Operating characteristic

1)rated voltage 0.6/1kv,10kv
2)max permissible continuous operating temperature of conductor:PVC insulated ≤70ºC.XLPE insulated ≤90ºC.
3)during short circuit(lasting less than 5s),the maximum temperature of the cable:PVC insulated is 160ºC;XLPE insulated should not exceed 250ºC.
4)laying temperature of cable should not less than -20ºC,cable should be preheated when below -20ºC.
5)bending radius:
-0.6/1kv
ré<25millimètre,should not less than 4D;steel core( intensive) should not less than 6D.
D≥25mm,should not less than 6D;steel core(intensive) should not less than 10D.
-10kv
single core cable should not less than 20D,steel core strand should not less than 25D.
multi-core cable should not less than 15D,steel core strand should not less 20D.

4.Why buy cables from luxing cable factory?

1) Reliable material;
-Each raw material into the plant, must undergo a rigorous selection and testing,
-To ensure that the best material to you.

2) Strict production;
-24 production processes, 24 detection processes,
-Each of the strict control procedures to ensure cable safety.

3) Safe packaging ;
-Using wood fumigation plate, plus metal packaging,
-reliable transport so that cable safely arrived at your site.