Pneumatic Quarry Boring DTH Drilling Machines
Modello numero.
LQ-PE-90B
Condizione
Nuovo
Brand
Keentool
Tipo
Pneumatic Quarry Drilling Machine for Boring
Diameter of Drilling Hole
65-90mm
Max Depth of Drill Hole
30m
Drilling Speed
3-6m/H
Air Consumption
9-12m3/Min
Drill Direction
Any Direction
Working Air Pressure
0.6MPa
Application
Drill Holes
Marchio
KEENTOOL
Pacchetto di trasporto
Crate
Specifica
SGS, CE
Origine
Quanzhou China
Codice HS
84306919
Descrizione
Descrizione:
Pneumatic quarry drilling machine for boring commonly used for drilling use a pneumatic system: The energy thrust is transmitted by compressed air.
Pneumatic quarry drilling machine for boring commonly used for drilling use a pneumatic system: The energy thrust is transmitted by compressed air.
In fact Pneumatic quarry drilling machine for boring need air compressors. The pneumatic hammers penetrate the rock mass by means of a drill rod that is nothing more than a shaped steel rod. The pneumatic system is supported or sometimes substituted by the hydraulic system in which hydraulic oil instead of air is used to transmit the energy.
Technical Data:
Modello | LQ-PE-90B | LQ-PE-90B |
Tipo | Full Pneumatic | Pneumatic & Electric |
Diameter of the drilling hole | Φ65-Φ90 | Φ65-Φ90 |
Max depth of drill hole | 30-40 Meter | 25-30Meter |
Drilling speed | 3-6 Meter/Hour | 4-6 Meter/Hour |
Air consumption | 9-12 M 3 /minimo | 5-8 M 3 /minimo |
Minimum air pressure | 0.6Mpa | 0.6Mpa |
Drilling direction | Any direction (Horizontal, Vertical, Slant) | |
Extension distance | 1.2 Metri | 1.2 Metri |
Advance device | Pneumatic motor, reducer, chain | Pneumatic motor, reducer, chain |
Rotation device | Pneumatic motor, reducer | Electric motor, reducer |
Adjust height of down jack | 220mm | 220mm |
Control panel | Remote control, manual change direction | |
Net weight | 550 KGS | 560KGS |
ALWAYS AT YOUR SERVICE–KEENTOOL