UL Jqx-62f-2z Coil Voltage DC12V 80A Dpdt Electronmagnetic Power Relay
Descrizione
| Main Parameter | ||
| Contatto Arrangement | 2UN,2B,2C | |
| Contact Material | Silver Alloy | |
| Contact Resistance | Max.50mΩ | |
| Rated Load | 80A 250VAC | |
| 80UN 28VCC | ||
| Massimo. Switching Voltaggio | 28VDC/250VAC | |
| Massimo. Switching Current | 80UN | |
| Massimo. Switching Power | 2240W/20000VA | |
| Electrical Life | 2×104 | |
| Mechanical Life | 1×107 | |
| Coil Power Consumption | DC | 3.0w |
| AC | 10VA | |
| Coil Voltage | DC | 6~220VDC |
| AC | 6~220VAC | |
| Other Parameters | ||
| Pick-up Volta | Massimo.30ms | |
| Release Time | Massimo.30ms | |
| Dielectric Strength | Coil Contacts | 2000VAC ,(50/60Hz), 1 min. |
| Open Contacts | 1500VAC ,(50/60Hz), 1 min. | |
| Insulation Resistance | minimo. 1000MΩ (500 VCC) | |
| Environment Temperature | -40ºC~+55ºC | |
| Operation Humidity | 45%~85% RH | |
| Shock Resistance | Functional | minimo. 10G |
| Destructive | minimo. 100G | |
| Anti-vibration | Functional | 1.5mm(DA)10~55 Hz |
| Destructive | 1.5mm(DA)10~55 Hz | |
| Il peso | ≤335g | |
Cautions of Power Relay:
We highly recommend cover :
(1)When the ambient humidity is ≥ 60% (for example refrigerator or some country like Indian), the metal parts of relay will be weakened in different degrees
due to long-term exposure to the outdoors in terms of electrical conductivity and service life.
(2)When the dust density is high in the environment, all kinds of impurities carried in the dust (such as gravel), if gravel is embedded between contacts.
Firstly, it will affect the normal opening and closing of contacts;Secondly, part of the silicon oxide can be used as a semiconductor to conduct electricity,
and then the relay’s on and off will fail if no anti-dust cover.
(3)When corrosive gases are serious in the environment, it will accelerate the metal aging, greatly affecting the service life of electrical relays.
* When none of the above situations exists, the plastic anti-dust cover is not necessary due to extra cost.
(1)We should pay attention to prevent contact movement, adhesion, abnormal consumption, increase of contact resistance and other fault phenomena while using.
(3)The mechanical service life and electrical service life can be main factor too
* In a word, good device need good relay to low the repairing rates and improve the endurance.