22 Years Manufacturing All Dielectric Self-Supporting ADSS Fiber Optic Cable

Modelo NÃO.
ADSS-48

Certifications
Ce/ISO9001/Tlc

Fiber Model
G657A/G652D

Central Strength Member
Gfrp

Loose Tube
PBT

Armour Layer
Fiberglass Yarns

Marca comercial
JIANGHONG or OEM

Especificação
2km/Drum

Origem
Sichuan, China

Código HS
8544700000

Descrição

We are 22 years coaxial cable, fiber optic cable, data cable manufacturer.

DESCRIPTION

The optical fiber loose tube is wound on the central reinforcement (usually FRP) at a certain pitch, and then the inner sheath is extruded (which can be omitted in small tension and small span), and then wrapped according to the required tensile strength Appropriate spinning yarn, then extruded PE or AT sheath.

FEATURES
1. Designed for power system, fully insulated medium, self-supporting overhead optical cable can be directly hung on the power pole tower;
2. Fully-insulated structure and high withstand voltage index, which is convenient for the installation of overhead power lines for live operation;
3. The FRP with high tensile strength can withstand strong tension and achieve a large span, while preventing bird pecking and artificial shooting;
4. The thermal expansion coefficient of the ADSS optical cable is small. When the temperature changes greatly, the arc of the optical cable line changes very little, and its weight is light, and its ice crawling and wind load are also small.

APPLICATIONS
Aerial

PERFORMANCE

Fiber Characteristic
Attenuation 1310nm:0.35dB/km
1550nm:0.21dB/km
Cutoff wavelengthWhen the cut-off wavelength of the optical fiber cable was tested on a 22 m long cable sample, it was less than 1260 nm.
Bending characteristicsThe attenuation characteristic test of 1550 nm was carried out after loosening 100 turns from the bending radius of 37.5 milímetros, and the attenuation increase value did not exceed 0.05 dB.
Mode field diameter1550nm : 10.4±0.5μm
1310nm:9.1±0.4μm
Cladding diameter125±0.7μm
Cladding non-circularity <1%
Mode length non-circularity<6%
Coating diameter 245±10 μm
Macro-bending radius 100trun X 30mm @1625 nm0.05dB
Mode field/cladding concentricity deviation≤10μm
Mechanical and Enviromental test
ItemTest method Acceptance Condition
Tensile strength ( IEC60794-1-2-E1)Load : 2700NLoss change 0.05dB@1550nm No fiber break nor sheath damage
Length of cable: about 50m
Load time : 1 Min
Crush testLoad : Short term crush(1100 N/cm)Loss change 0.05dB@1550nm No fiber break nor sheath damage
Load time : 1 Min
Impact testPoints of impact : 10Loss change 0.05dB@1550nm No fiber break nor sheath damage
Times per point : 1
Impact energy : 10J
Repeated bendingBending dynamic radius : 20 DLoss change 0.05dB@1550nm No fiber break nor sheath damage
NO. of cycle : 20
TorsionComprimento:1mLoss change 0.05dB@1550nm No fiber break nor sheath damage
-Twist angle;±90°
-No. of cycle:10
Water penetrationHeight of water : 1mNo water leakage
Sample length:3m
Time :24 h
Temperature cyclingTemperature :-40~+70CLoss change 0.05dB@1550nm No fiber break nor sheath damage
Time of each step:24h
No. of cycle :1
Drip test 0~70 degree No filling compound dripping
High pressure test AC10KV , 50HzLoss change 0.05dB@1550nm No fiber break nor sheath damage

22 Years Manufacturing All Dielectric Self-Supporting ADSS Fiber Optic Cable
22 Years Manufacturing All Dielectric Self-Supporting ADSS Fiber Optic Cable
22 Years Manufacturing All Dielectric Self-Supporting ADSS Fiber Optic Cable
22 Years Manufacturing All Dielectric Self-Supporting ADSS Fiber Optic Cable
22 Years Manufacturing All Dielectric Self-Supporting ADSS Fiber Optic Cable
22 Years Manufacturing All Dielectric Self-Supporting ADSS Fiber Optic Cable
22 Years Manufacturing All Dielectric Self-Supporting ADSS Fiber Optic Cable
22 Years Manufacturing All Dielectric Self-Supporting ADSS Fiber Optic Cable
22 Years Manufacturing All Dielectric Self-Supporting ADSS Fiber Optic Cable
22 Years Manufacturing All Dielectric Self-Supporting ADSS Fiber Optic Cable

22 Years Manufacturing All Dielectric Self-Supporting ADSS Fiber Optic Cable
Perguntas frequentes

1.Are you the factory?
Sim, we are the factory with 22 anos’ history.

2. What is your main products?
Fiber optic cable: Outdoor/Indoor
Central loose tube/Stranded loose tube
FTTH Drop cables
ADSS
Coaxial cable: RG59/RG6/RG11
Network Data cable:UTP/FTP/SFTP
CAT5/CAT5e/CAT6/CAT7
Power cable: RVV series products
Various combination cables: Coaxial & Data cable
Coaxial & Fiber optical cable
RVV & Data cable
RVV & Fiber optical cable
3. Do you have certificate for raw material?
Sim, we do. We build long-term relationship cooperation with qualified ISO9001, ROHS raw material suppliers.

4. What is your delivery time?
Sample ready date is 2-3 dias
Mass production is around 7-14 dias

5. MOQ: what is your minimum quantity?
MOQ for fiber optic cables: 2KM
MOQ for coaxial cable:1KM
There is no MOQ required for CAT5e/CAT6 cable, as there’s stock for normal kinds.

6. Are you willing to cooperate with distributors?
We are currently seeking distributors in many countries around the world for long-term cooperation.
7. Have you worked with operators?
Sim, we have many years of experience in cooperation and supply with operators.

8. Envio & Delivery
For large orders: by sea (LCL or FCL)
For small orders: by sea (LCL), by air or by courier services, any of which is optional.