Electric 0.6/1kv 4 Core 120mm2 Swa Armoured PVC Insualted Underground Power Cable

1 Information
uma, Number of cores:1, 2, 3, 3+1, 3+2, 3+3, 4, 4+1, 4+2, 5 and so on
b, Construction:
Condutor: Solid or stranded copper
Insulation: Polyvinyl chloride (PVC)
Filler: Polypropylene filament with lapped binding tape
Binder: Binding tape
Inner sheath: Polyvinyl chloride (PVC)
Armor: Galvanized steel wire armored(SWA) or steel tape armored(STA)
Sheath: Polyvinyl chloride (PVC)
c, Nominal Section
Area(mm2) :1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800
d, feature
1). Rated power-frequency voltage Uo/U: 0.6/1KV.
2). Máx.. the permissible continuous operating temperature of conductor: 70C
3). Máx.. shortcircuit temperature of the conductor shall not exceed: (5S maximum duration) 160C
4). The ambient temperature under installation should not below 0C
5). The bending radius of a cable should not be less than 15 times the cable diameter.

2 Standard:
IEC60502,and BS6346, VDE, AS/NZS, UL,etc or as customer’s request.

3 The Rated Voltage(kV):
1st class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35
2nd class 1/1 3/3 6/6 8.7/10 12/15 18/20 – 26/35

4 Inscrição:
1)These cables are most suitable for direct burial or for installation on trays or ducts, Where there is a risk of mechanical damage, armored cables should be used.
2) For laying in the ground along the route with a large difference of level able to bear external mechanical forces.

5 Type and Name: