Roll to Roll Automatic CCD Screen Printing Machine
Description
JST5070RTR-CCD is suitable for high precision film printing; Such as pen shading reflection module on the multi-process printing materials, optical Film , conductive Film, LCD flexible panel, RFID, smart card and other flexible line printing.
MAIN PARAMETERS
| No. | NAME | SIZE |
| 1 | Max. Print SIZE | 500mm*700mm |
| 2 | Min. Print Size | 250mm*350mm |
| 3 | Print Table | 750mm*1200mm |
| 4 | Max. Frame Size | 750mm*1050mm |
| 5 | Print bed suction area | 410mm*1500mm |
| 6 | Print bed suction hole size | 0.5mm |
| 7 | materials width feeding | 520mm |
| 8 | Max. Diameter of unwinding | 400mm |
| 9 | printing speed | 850-1000 |
| 10 | materials thickness | 0.0125-0.2mm |
| 11 | CCD camera position accuracy | ±0.03mm |
| 12 | Jump accuracy (electric eye) | ±0.1mm |
| 13 | (CCD)Jump accuracy (CCD) | ±0.05mm |
| 14 | motor let off (servo) | 1KW |
| 15 | print drive (servo) | 0.4KW |
| 16 | width take up in oven | 520mm |
| 17 | Max. Diameter winding | 400mm |
| 18 | Max. Power of OVEN | 26kw |
| 19 | Temperature | ≤120ºC |
| 20 | Dry length effective | 40m |
| 21 | voltage | 3P380V-410V |
| 22 | air pressure | 6-8Mbar |
| 23 | air pressure cost | 10L/H |
| 24 | power rate | 30KW |
| 25 | current rate | 45A |
| 26 | weight | 3500kg |
| 27 | (L*W*H)dimension | 8000mm*1200mm*2100mm |
MAIN PROPERTY
1.Roll materials let-off
- The whole frame of the machine is welded with international standard steel.
- Frequency conversion motor drive unwinding, stepless speed regulation to ensure that the material is not stretched when unwinding;
- Unwinding coaxial air expansion axis, feeding operation is simple;
- Design automatic stop function if end of material, and light alarm prompt;
- Pneumatic manual docking table, convenient no joint docking;
- Internationally famous brand middle edge machine is used to ensure accurate material unwinding.
- Equipped with a set of punching system, with a variety of printing process;
- Automatic dust removal and static electricity removal device is designed to ensure that pre-press materials are clean and without static electricity.
- 4 post print head, improve the printing stability, to ensure that the printing pattern does not deform, do not pull screen plate;
- The squeegee is driven by servo motor, which runs smoothly.
- The printing table is made of special aluminum plate surface fine grinding, hard oxidation treatment, to ensure that the material does not scratch;
- Printing with anti-drip ink function, suitable for special process printing;
- U/V/W 3D platform is used to drive the screen frame alignment;
- To check the relative position via double cameras to photograph and collect the printed matter;
- The vacuum suction roller is used to take up the material moving;
- Vacuum suction roller drive via Mitsubishi high-precision servo motor, with high-precision planetary reducer;
- Vacuum suction unit with high performance oil-free vacuum pump;
- The manuel visual inspection position in this take up section,and equipped with LED lighting.
To ensure that the printing and drying speed match the design of negative pressure accumulate device, to ensure that the printing products do not adhere to and wrinkle phenomenon;
According to the width of the material, the accumulation size can be adjusted;
6.Dry Oven
Snail type return winding design, the insulation thickness is 80mm and based on 120ºC (the insulation layer needs to be thickened at special high temperature);
Standard oven design three zones heating area, hot air circulation in each zone independent control, furnace temperature uniform;
All the internal guide rollers are made of aluminum, the surface is hard oxidized, and the material is not scratched.
Oven inlet part of the design of vacuum suction plate, to ensure that the furnace material tension stability;
7. Batching Device(winder)
Frequency conversion motor drive winding, frequency conversion stepless speed regulation;
Coaxial air expansion is adopted for rewinding and unloading is easy to operate.
The rewinding adopts the international famous brand rectifying system, and the rewinding is neat.
The winding adopts automatic tension system to ensure that the winding material does not stretch and deform.
Automatic laminating system is designed for the rewinding part, which is suitable for different product process requirements.
Loading and Shipment Package
